Description
A white single fold card is covered with a sheet of decorative paper with the repeated message It’s a Boy! This sheet covers the whole of the back and two-thirds of the front. A blue card cut-out teddy is mounted on the front with foam pads.
Materials used
- Bright white single fold greetings card 144 mm (5½ in) square
- Decorative paper from Paper Pizazz with blue It’s a Boy words
- Blue card teddy (from an accessory pack)
- Card adhesive or double-sided self adhesive tape
- Self-adhesive mini foam pads
Method
Lay a sheet of decorative blue paper face down on your work surface. Lay your opened greetings card over this and mark the size of the card with a fine pencil. Adjust the length of the paper so that when it is folded around the greetings card it will cover about two-thirds of the front. Cut the paper to size.
Mount the decorative paper on the card by applying a strip of card adhesive or double-sided self adhesive tape on the back of the greetings card alongside the folded edge.
Mount the card teddy in position with self-adhesive mini foam pads. This forms a bridge between the card and the decorative paper, holding it in place.
This design can of course be converted with ‘It’s a Girl’ paper and a pink teddy.
It’s a boy card card made by Naomi Jackson and reproduced with kind permission.
All images copyright and reproduced with kind permission.